DAD.info
Forum - Ask questions. Get answers.
Welcome to the DAD.Info forum: Important Information – open to read:

Our forum aims to provide support and guidance where it can, however we may not always have the answer. The forum is not moderated 24 hours a day, so If you – or someone you know – are being harmed or in immediate danger of being harmed, call the police on 999.

Alternatively, if you are in crisis, please call Samaritans on 116 123.

If you are worried about you or someone you know is at risk of harm, please click here: How we can help

Where shall I buy a...
 
Notifications
Clear all

[Solved] Where shall I buy a car screen wiper arm?

 
(@geek84)
Honorable Member Registered

Good Morning Folks

I have a 2002 Ford Fiesta and the left wiper arm needs replacing.

Are all wiper arms the same size? Would it come with all the necessary screws/bolts required to fit it on?

Can you suggest any good/cheap places where I can buy the wiper arm. I have tried my local retailers but they only sell the arm and blade together. I don't want to but the blade since the blades I already have are fine and I can just transfer then on to the new arm.

Thank U

Quote
Topic starter Posted : 12/07/2013 12:05 pm
(@dadmod4)
Illustrious Member

Halfords do 'refill' blades that you cut to length - I think they come in a pack of 5 or 6 blades.

ReplyQuote
Posted : 14/07/2013 12:08 am
(@geek84)
Honorable Member Registered

Hi actd

I've got the blade - I just want to buy the right sized arm.

ReplyQuote
Topic starter Posted : 14/07/2013 12:08 pm
(@Super Mario)
Noble Member Registered

if you google which wiper blade you should find a site that allows you enter you car registration and then it will tell you which blade you need

Or you could do what I normally do - pay the extra for someone from Halfords to select and fit your blade

ReplyQuote
Posted : 16/07/2013 1:42 am
(@got-the-tshirt)
Famed Member Registered

I think he has the blade it's the arm he needs.

Do a quick search on ebay, you will find an arm cheap.

They are easy to fit, you pop the cap off the base of the wiper arm, then undo the nut below (normally a 10mm nut) remove the old one and fit the new, just be carful to fit back onto the splines (you will see what I mean once the old one is off) in the same place as the old one so it travels the same distance accross the screen and doesn't hit the base of the windscreen or the other blade/arm

GTTS

ReplyQuote
Posted : 16/07/2013 10:57 pm
(@dadmod4)
Illustrious Member

Ah yes - I think that's a case where I need to RTFQ πŸ™‚

ReplyQuote
Posted : 17/07/2013 11:11 pm
Share:

Pin It on Pinterest